Assign As Tap-Tempo Switch - Musicom Lab EFX-LE II Owner's Manual

* The above two LCD screens shows when the PC (Program Change) is selected.
* The above two LCD screens shows when the CC (Control Change) is selected.
* The above two LCD screens shows when the NT (Note On) is selected.

4.3.3 Assign as TAP-TEMPO Switch

The Tap-Tempo switch is used to tap the switch to input the Global.BPM.
This page allows you to set the LED color and four MIDI messages.
The LED color and MIDI.1~MIDI.4 can be set to the same procedures as the IA switch.
EFX-LE II Audio Controller Owner's Manual
• Line 2 - c and d indicate the MIDI Program Change is selected.
• Line 2 - m and n indicate the MIDI Program Change channel (01~16).
• Line 2 - p indicates that a next page exists
• Line 2 - a indicates that a previous page exists
• Line 2 - f to h indicate the MIDI Program Change number transmitted when
the IA switch is turned on. (001~128)
• Line 2 - n to p indicate the MIDI Program Change number transmitted when
the IA switch is turned off. (001~128)
• Line 2 - c and d e indicate the MIDI Control Change is selected.
• Line 2 - h and i indicate the MIDI Control Change channel (01~16).
• Line 2 - m to o indicate the MIDI Controller number (000~127).
• Line 2 - f to h indicate the MIDI Controller value transmitted when the IA
switch is turned on. (000-127)
• Line 2 - n to p indicate the MIDI Controller value transmitted when the IA
switch is turned off. (000-127)
• Line 2 - c and d indicate the MIDI Note On is selected.
• Line 2 - h and i indicate the MIDI Note On channel (01~16).
• Line 2 - m to o indicate the MIDI Note(Key) number (000~127).
• Line 2 - f to h indicate the MIDI Note(Key) velocity transmitted when the
IA switch is turned on. (000-127)
• Line 2 - f to h indicate the MIDI Note(Key) velocity transmitted when the
IA switch is turned off. (000-127)
• Line 1 - a to g indicate the switch that is going to be created/modified.
• Line 1 - i to p indicate the details that can be set when the switch is
assigned to the tap tempo switch.
(LedColor, MIDI.1~MIDI.4)
• Line 2 - i to p indicate indicate that the switch is assigned as the Tap Tempo
switch.
21