Assign As Ia Switch - Musicom Lab EFX-LE II Owner's Manual

* The above two LCD screens shows when the CC (Control Change) is selected.
* The above two LCD screens shows when the NT (Note On) is selected.

4.3.2 Assign as IA Switch

This page allows you to set the IA attribute, LED color, four audio actions and four MIDI messages.
IA Attribute
You can set the following things in IA Attribute settings.
• Whether to latch or moment the switch response
• Whether or not IA On/OFF is linked to a preset
• Set two or more IA switches as a group (up to three groups per page)
• Enable the IA switch to be switched on or off via the external MIDI controller
EFX-LE II Audio Controller Owner's Manual
• Line 2 - c and d indicate the MIDI Control Change is selected.
• Line 2 - h and i indicate the MIDI Control Change channel. (01~16)
• Line 2 - m to o indicate the MIDI Controller number. (000~127)
• Line 2 - p indicates that a next page exists
• Line 2 - a indicates that a previous page exists
• Line 2 - f to h indicate the MIDI Controller value. (000-127)
• Line 2 - c and d indicate the MIDI Note On is selected.
• Line 2 - h and i indicate the MIDI Note On channel (01~16).
• Line 2 - m to o indicate the MIDI Note(Key) number (000~127).
• Line 2 - p indicates that a next page exists
• Line 2 - a indicates that a previous page exists
• Line 2 - f to h indicate the MIDI Note(Key) velocity (000-127).
• Line 1 - a to g indicate the switch that is going to be created/modified.
• Line 1 - i to p indicate the details that can be set when the switch is
assigned to the IA switch.
(IA.Attrb, LedColor, Audio.1~Audio4, MIDI.1~MIDI.4)
• Line 2 - k to p indicate indicate that the switch is assigned as the IA switch.
• Line 2 - a to g indicate the Switch Function is selected.
• Line 2 - i to p indicate the selected switch function.
(Latched or Momentary)
19