Musicom Lab EFX-LE II Owner's Manual page 14

SW #1 & SW #2
Moving the cursor.
When the cursor is at the loop number or volume A/B/S :
SW #3 & SW #4
When the cursor is at the signal line :
When the cursor is at the I :
When the cursor is at the loop numbers or volume A/B/S :
SW #5 & SW #8
SW #6 Storing any changes made while in this menu.
SW #7 Returning to the Presets menu.
Changing the Effect Loop Connection Order
Example : Change the order of effect loops 3 and 4.
① Use the #1 or #2 switch to move the cursor to loop 3.
③ Press the #6 switch to store this edit.
Making a parallel Connection
Example : Connect effect loops 5 and 6 in parallel.
① Press the #1 or #2 switch to move the cursor to the A.
③ Press the #1 switch to move the cursor before loop 6.
⑤ Press the #1 switch to move the cursor to the loop 5.
⑦ Press the #5 switch to move the loop 5 to the upper line.
EFX-LE II Audio Controller Owner's Manual
Moving the selected loop to the left/right.
SW #3 : Creating/deleting a parallel connection.
SW #4 : Creating/deleting a signal split.
Increasing/decreasing a preset number
SW #5 : Moving the selected loop to the up/down.
SW #8 : When the cursor is at the loop number : Creating/deleting a Carry Over.
When the cursor is at the volume A/B/S : Changing A-B to S or S to A-B.
② Press #4 switch to move the loop 3.
② Press #3 switch to move to next to the loop 6.
④ Press #3 switch to specify the parallel connection.
⑥ Press #4 switch to move the loop 5 into the
parallel connection.
14