Mode Description; Preset Mode; Direct Access Mode - Musicom Lab EFX MKII User Manual

3. Mode Description

The EFX Mk II Audio Controller utilizes three modes of operation, Preset Mode, Direct Mode and
Edit Mode.
On power-up, the display will show its firmware version, upon which bank 1 and the global preset
will be selected.

3.1 Preset Mode

The EFX Mk II Audio Controller has 101 presets, configured as 25 banks of 4 presets, plus a
global preset which is common to all banks.
The Preset Mode is automatically selected when the power is initially turns on.
①
Press/hold the BANK UP or BANK DOWN switches to scroll through the 25 available banks.
②
The display will be flashing.
③
The preset is selected via pressing the PS-1 through PS-4 switches.
④
The display will stop flashing and the LED above the switch turns on.
For example, to select the second preset of the bank 3, press the BANK UP switch until the 3 is
shown on the display. And then press the PS-2 switch.
The global preset is a preset with all the capabilities of preset 1 through 4, but is the same for
all banks. Pressing the switch of a preset that is already on selects the global preset and will
cause the LED above the switch to turn off.
Press the MUTE switch to mute the output. When muted, the three decimal points on the display
will turn on and output signal will be mute.
Press the MUTE switch to cancel the mute function. Mute function is available in all mode.

3.2 Direct Access Mode

①
Select the preset to be programmed in the Preset Mode.
②
Press the MODE switch to enter the Direct Access Mode. The display will show:
And the 4 LEDs above PS-1 ~ PS-4 switches will indicate the respective Loop 1 ~ Loop 4 as
on or off.
③
Press the PS-1 through PS-4 switches to turn the respective Loop1 ~ Loop4 on or off. The
respective LEDs will go on or off.
EFX MkII Audio Controller User Manual
(Programming the Loops)
5