Audio - Musicom Lab EFX-LE II Owner's Manual

XPDL
This page allows determining whether you connect an expression pedal or two foot-switches to the XPDL jack.
You can also set the MIDI Control Change that is sent when an expression pedal is connected.
Tempo.CC
Some MIDI devices receive MIDI Control Change, not MIDI TIME CLOCK, as the tempo message.
This page lets you set the MIDI Control Change as a tempo for these units.

4.5.2 AUDIO

Clickless
The Clickless control is excellent for reducing this a popping noise. This page allows determining the position that this
control will be used.
SW #1 & SW #2 Moving the selected blinking area.
SW #5 & SW #8
Increase or decrease the selected item.
SW #6
Storing any changes made while in this menu.
SW #7 Rerutning to the Global menu.
EFX-LE II Audio Controller Owner's Manual
• Line 1 - a to d indicate that the XPDL is selected.
• Line 1 - f and g indicate 'Two Foot-swtiches'.
• Line 1 - a to d indicate that the XPDL is selected.
• Line 1 - f and g indicate 'Expression Pedal'.
• Line 1 - j and k indicate the MIDI Control Change Channel. (01~16)
• Line 1 - n to p indicate the MIDI Controller Number. (000~127 or OFF)
• Line 2 - c to e indicate indicate the highest XPDL value that the expression
pedal port can transmit when its pedal is moved. (000~127)
• Line 2 - i to k indicate indicate the lowest XPDL value that the expression
pedal port can transmit when its pedal is moved. (000~127)
• Line 1 - j and k indicate a XPDL Rate value. (00~20)
• Line 1 - a to h indicate that the Tempo.CC is selected.
• Line 1 - o and p indicate the MIDI Control Change channel (01~16).
• Line 2 - b to d indicate the MIDI Controller number. (000~127 or OFF)
• Line 2 - h to j indicate the MIDI Controller on value. (000~127 or OFF)
• Line 2 - n to p indicate the MIDI Controller off value. (000~127 or OFF)
• Line 1 - a to i indicate that the Clickless is selected.
• Line 2 - j to p indicate the Clickless position.
(Off, VL.Send or Outputs)
28