Musicom Lab EFX-LE II Owner's Manual page 8

2.3 Page 2
This page allows you to turn each of the audio loops on or off individually. On the Page 1, pressing the PAGE switch
brings you to the Page 2. To left bottom of the each switch, there is a label reading L1 through VL.
The following is the assignment of each switch on the Page 2.
SW #1 SW #2
Loop 1 Loop 2
* Pressing/holding the #6 switch for 1 second will store the edit and return to the Page 1.
For the other side, pressing the #6 switch will move to the Page 3.
If there is a change in the combination of IA switches, the preset number of the LCD display will blink.
2.4 Page 3
This page allows you to control 2 function switches, outputs, volume controllers and
Page 2, pressing the PAGE switch brings you to the Page 3. To first right bottom of the each switch, there is a label
what the switch does on the Page 3.
The following is the assignment of each switch on the Page 3.
SW #1 SW #2
Ouput Output
Left Right
* Pressing/holding the #6 switch for 1 second will store the edit and return to the Page 1.
For the other side, pressing the #6 switch will move to the Page 4.
** Volume A/B cannot be switched on/off when used as a parallel connection or carry over function.
If there is a change in the combination of IA switches, the preset number of the LCD display will blink.
2.5 Page 4
This page allows you to control the movable buffer and increase/decrease Preset.BPM and Volume Values
individually. On the Page 3, pressing the PAGE switch brings you to the Page 4. To second right bottom of the each
switch, there is a label what the switch does on the Page 4.
The following is the assignment of each switch on the Page 4.
SW #1 SW #2
Movable Decrease
Buffer Volume A
* Pressing/holding the #6 switch for 1 second will store the edit and return to the Page 1.
For the other side, pressing the #6 switch will move to the Page 1.
If there is a change in the combination of IA switches, the preset number of the LCD display will blink.
EFX-LE II Audio Controller Owner's Manual
SW #3 SW #4
Loop 3 Loop 4
SW #3 SW #4 SW #5
Function Function
Switch 1 Switch 2
SW #3 SW #4 SW #5
Increase Decrease Increase
Volume A Volume B Volume B
SW #5 SW #6
Page Up
Loop 5
/Save( * )
SW #6 SW #7
Input Page Up Volume A
Buffer /Save( * ) (
SW #6 SW #7
Page Up
Decrease
* Preset BPM
/Save( )
SW #7 SW #8
Volume
Loop 6
Loop
input buffer individually. On the
SW #8
Volume B
** ) ( ** )
SW #8
Increase
Preset BPM
8