Setup Mode; Order Menu - Musicom Lab EFX MK-V Owner's Manual

4. SETUP Mode

To enter the SETUP Mode, press and hold the I I A1/SETUP switch for 2 seconds. The display will show the
following picture.
Press the O O RDER (1) switch to enter the Order menu.
Press the M M IDI (2) switch to enter the MIDI menu.
Press the C C OPY (3) switch to enter the Copy menu.
Press the T T ITLES (4) switch to enter the Titles menu.
Press the S S ONG/SET (5) switch to enter the SongSet menu.
Press the U U TILITY (6) switch to enter the Utility menu.
Press the I I A2/MUTE switch to exit the SETUP mode.

4.1 ORDER Menu

The sub-menu allows changing loop structure you can make the following settings.
Change the connection order of effect loops
Create a parallel connection
Specify Spill Over
The EFX MK-V has two internal mixers. By using these internal mixers, you can connect loops in parallel
and use the Spill Over function.
NOTE :
The same mixers are used for parallel connections and for Spill Over functions.
Loop 1 Loop2 Volume loop
The , ,
Over functions .
For the mono/stereo returns of effect loops 8 and 9, Refer to the
SEND9.R SPLIT
on the page 29 of the manual.
The Spill Over function allows the return signal of a currently selected preset to 'Spill' into the next
selected preset.
Line 1 - b, c and f indicate the bank number and preset that you want to edit.
Line 2 - a to w indicate the loop structure of the preset.
EFX MK-V Audio Controller Owner's Manual
Movable Buffer CAN NOT
and
parallel connections
be used for
LOOP8/9 RETURN
Loop Number
-
Volume Loop
Movable Buffer (B3)
A loop for which
-
Spill Over is specified
Mono connection
Stereo connection
Spill
or
LOOP9
and
11