Setup Mode - Musicom Lab MTX-5 Owner's Manual

4. SETUP MODE

To enter the SETUP mode, press the SW#4(PAGE) and SW#5(TAP) switches simultaneously in the Page 1.
The LCD display will show the following picture.
The switch functions in the picture below are common in SETUP mode.
SW#1 / SW#2
Move up/down the selectable menu.
SW#3 / SW#5
Increase/decrease the parameter of the selected menu.
SW#4
Press : Enter the submenu of selected menu.
Hold : Store any changes made. In the Utility menu, start copying or factory resetting.
If there is a triangle character on the right side of the selected menu, it means that a submenu exists.
SW#4 & SW#5 simultaneously
MTX-5 MIDI Controller Owner's Manual
Exit to the previous menu.
9