Setup Mode - Musicom Lab EFX-10D Owner's Manual

4. SETUP MODE

To enter the SETUP mode, press the #5(PAGE) and #7(BANK▲) switches simultaneously in the Page 1.
The LCD display will show the following picture.
The switch functions in the picture below are common in SETUP mode.
① SW#1
Press : Enter the submenu of selected menu.
Press and hold : Store any changes made. In the Utility menu, start copying or factory resetting.
• If there is a triangle character on the right side of the selected menu, it means that a submenu exists.
② SW#2
– Exit to the previous menu.
③ SW#3 & SW#6
– Move up/down the selectable menu.
④ SW#4 & SW#7
– Increase/decrease the parameter of the selected menu.
EFX-10D Audio Controller Owner's Manual 10