Global Menu; Midi - Musicom Lab EFX-LE II Owner's Manual

4.5 GLOBAL MENU

The Global menu allows configuring the EFX-LE II's general functionality by selecting its MIDI, Audio and Others.

4.5.1 MIDI

PC Offset
There are two ways to display MIDI Program Change Number (from 0 to 127 or from 1 to 128).
This page allows displaying by specifying a minimum value for Program Change Number.
SW #1 & SW #2
Moving the selected blinking area.
SW #5 & SW #8 Increase or decrease the selected item.
SW #6 Storing any changes made while in this menu.
SW #7 Rerutning to the Global menu.
MIDI IN/OUT
MIDI IN Channel : The MIDI channel that the EFX-LE II will respond to incoming MIDI messages on.
MIDI OUT : MIDI data in the EFX-LE II are transmitted via the MIDI OUT connector.
MIDI THRU : MIDI data received at the MIDI IN connector pass through via the MIDI OUT connector without any
changes.
Time Clock
This page allows determining whether or not to transmit or receive the MIDI TIME CLOCK message.
EFX-LE II Audio Controller Owner's Manual
SW #5 & SW #8
SW #6
SW #7
• Line 1 - a to i indicate that the PC Offset is selected.
• Line 2 - p indicates the PC Offset number. (0 or 1)
• Line 1 - a to k indicate that the MIDI IN/OUT is selected.
• Line 2 - d and e indicate the MIDI channel the EFX-LE II will receive.
(01~16 or OFF)
• Line 2 - m to p indicate OUT or THRU.
• Line 1 - a to j indicate that the MIDI Time Clock is selected.
• Line 2 - e to g indicate whether or not to transmit. (ON or OFF)
• Line 2 - n to p indicate whether or not to receive. (ON or OFF)
Moving the selected blinking menu.
Entering the selected menu.
Rerutning to the Setup menu.
27