Routing - Musicom Lab EFX-LE II Owner's Manual

Editing Volume.A & Volume.B
SW #1 & SW #2 Moving the selected blinking area.
Blinking at the Line 1 – a to g : Increasing/decreasing a preset number.
Blinking at the Line 1 – i to p : Scrolling MIDI.01~MIDI.12, XPDL, BPM and Volume.A/B.
SW #5 & SW #8
Blinking at the Line 2 – j to p : Scrolling a Volume value.
SW #6 Storing any changes made while in this menu.
SW #7 Rerutning to the Presets menu.

4.1.2 ROUTING

The Routing menu allows changing loop structure you can make the following settings.
• Change the connection order of effect loops
• Create a parallel connection
• Create a split connection
• Specify Carry Over
The EFX-LE II has two internal mixers. By using these internal mixers, you can connect loops in parallel, use the Carry
Over function and set the volume each preset.
* Two mixer(A, B or S) are used for parallel connections, Carry Over functions and volume control.
* For the mono/stereo returns of effect loops 5 and 6, Refer to the LOOP5/6 RETURN and LOOP6 SEND on the
page 29 of the manual.
* In order to use the Carrie Over function correctly, it is necessary to set the Carrie Over on both the current preset
and the next selected preset.
• Line 1 – e to g indicate the preset number that you want to edit.
* A and B are the Mono Mixers/Volume-Contollers.
S is the Stereo Mixer/Volume-Contoller.
A and B can be combined into S, and S can be divided into A and B.
EFX-LE II Audio Controller Owner's Manual
• Line 1 - e to g indicate the preset number that is going to be created/
modified. (001~640 or GLB)
• Line 1 - i to p indicate that Volume.A or Volume.B is selected.
• Line 2 - j to p indicate the volume value of the current preset.
(-48.5dB ~ +15.0dB)
-
Loop Number
A loop for which
-
Carry Over is specified
Volume Loop
Movable Buffer (BM)
Mixers/
Volume Controllers
Mono connection
Stereo connection
13