CHAPTER 5 TROUBLESHOOTING
6) Exit the service tool.
7) Reset the scanner power.
8) Start the service tool and verify that the
version and the total scanning count
displayed on the service screen are
correct.
Figure 5-242
Note: Do not turn the power OFF including
the USB cable is removed during
loading. If the power is turned OFF, it
returns to its original state when
restarted, but this is not guaranteed.
5-20
12. About
This mode displays a detailed version
of the service tool.
On the service screen, select [About]
to display the version screen.
Press [OK] to close the version
screen.
COPYRIGHT © CANON ELECTRONICS INC. 2011
Figure 5-243
CANON DR-C125 FIRST EDITION