Replacement Parts; About The Flatbed Scanner Unit 101; Flatbed Scanner Unit 201 - Canon imageFORMULA DRM160ii User Manual

Operating Environment
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH
AC Adapter (100 to 240 V type)
Model Number MG1-5039
Input AC100 to 240V, 50/60 Hz, 1.06 to 0.6 A
Output DC24V 2.0A
Weight Approximately 0.3kg (0.66 lb) (excluding power
cord)
Specifications are subject to change without notice due to product
improvements.

Replacement parts

Exchange roller kit (product code: 0697C003)
Kit to replace the rollers (feed roller, retard roller).
• For the replacement procedure,
on p. 60.
• Contact your local authorized Canon dealer or service
representative for detailed information about the replacement parts.
Option
Flatbed scanner unit 102 (product code: 2152Cxxx)
Flatbed scanner unit that can be connected to and used with a DR
scanner. Connecting the unit to this scanner enables you to use this
scanner as a flatbed scanner with an automatic document feeder.
Flatbed scanner unit 201 (product code:6240Bxxx)
A flatbed scanner unit that can be used by connecting to a DR scanner
and supports A3 size paper. Connecting the unit to this scanner
enables you to use this scanner as a flatbed scanner with an
automatic document feeder.
Network adapter NA10 (product code: 2998Cxxx)
This is an optional adapter for connecting the scanner to the network
via wired LAN.
Network adapter WA10 (product code: 2999Cxxx)
This is an optional adapter for connecting the scanner to the network
via wired LAN or wireless LAN.
see "Replacing Consumable Parts"

About the Flatbed Scanner Unit 101/

Flatbed Scanner Unit 201

The optional Flatbed Scanner Unit 101/201 can be connected to and
used with this scanner.
System requirements
The computer must comply with the necessary system requirements
of Flatbed Scanner Unit 101/201.
The scanner driver of Flatbed Scanner Unit 101/201 needs to be
installed to use the unit.
About Use with CaptureOnTouch
About Assigning Function to Start Button
When you connect Flatbed Scanner Unit, you can assign Scanning
Shortcut of CaptureOnTouch to the start button of Flatbed Scanner
Unit.
Limitation of Restarting with Start Button
When CaptureOnTouch is set not to be resident in memory,
CaptureOnTouch cannot be restarted by pressing the start button on
Flatbed Scanner Unit after you end CaptureOnTouch.
About Setting up the Scanner Driver
When functions of this scanner cannot be selected with the Flatbed
Scanner Unit settings dialog box, click [Option] in the dialog box to
open the scanner driver and make the required settings.
77