Canon imageFORMULA DR-C125 Service Manual page 69

3) Replace Rollers Display
Once the number of sheets fed
exceeds the guide for replacement of
100,000 sheets, a screen displaying
the message [Replace Rollers] is
displayed the next time the computer
recognizes the
following shows
Windows.
Figure 4-303
4) Method for Replacing Rollers
Retard roller
When attaching the roller, align the
cut-out section of the roller with the axle.
Figure 4-304
Figure 4-305
COPYRIGHT © CANON ELECTRONICS INC. 2011
CHAPTER 4 INSTALLATION & MAINTENANCE
machine. The
the screen in
CANON DR-C125 FIRST EDITION
Feed roller
When attaching the roller, align the
cut-out section of the roller with the axle.
Figure 4-306
Figure 4-307
5) Resetting after replacement
The counters need to be reset after
replacing the rollers. The following
shows the method for doing this in
Windows.
•
Start Windows,
administrator privileges.
•
Click the [Start]
computer, and
Programs], [Canon DR-C125], and
[Canon imageFORMULA Utility] in
order.
•
"The Canon imageFORMULA Utility"
starts, and the screen is displayed.
•
Select [Canon DR-C125 USB] and
then click [Properties].
and login with
button on the
then click [All
4-7