Feed Roller Drive Shaft; Follower Roller - Canon imageFORMULA DR-C125 Service Manual

4. Feed Roller Drive Shaft

1) Remove the front unit.
(Page 3-4)
2) Remove the front cover.
(Page 3-5)
3) Spread open the fitting part
remove the feed roller drive shaft
Figure 3-205
COPYRIGHT © CANON ELECTRONICS INC. 2011
CHAPTER 3 DISASSEMBLY & REASSEMBLY

5. Follower Roller

Note: The rollers on the registration side and
the
component.
1) Open the front unit, spread open the
and fitting parts
1
. remove the follower roller
2
Note: In the below figure, the roller in the
registration side is removed.
CANON DR-C125 FIRST EDITION
eject side are
on both sides, and then
1
2
Figure 3-206
the same
.
3-7