CHAPTER 4 INSTALLATION & MAINTENANCE
III. MAINTENANCE
1. User Maintenance
Refer to the "User Manual" for the
details.
1) List
No. Location/Parts
1
Main body
2
Reading glass
3
Retard roller
4
Feed roller
5
Other rollers
6
Feed path
2) Locations to be cleaned
•
Main body
Figure 4-301
4-6
Intervals
As
100,000
necessary
sheets
∆
∆
∆
∆
∆
∆
Table 4-301
COPYRIGHT © CANON ELECTRONICS INC. 2011
Details
Use a cloth slightly dampened with water and
well wrung out to remove any dirt, and then
use a clean, dry cloth to wipe the main body.
Use a soft, clean, and dry cloth to wipe off any
dirt.
Use a cloth slightly dampened with water and
well wrung out to remove any dirt, and then
use a clean, dry cloth to wipe the main body.
Note: Remove the retard/feed roller from the
main body before cleaning.
Use such as air blowers to remove any dust
and paper particles that have accumulated on
the feed path.
•
Inside eject pocket
Figure 4-302
[∆:Clean,
: Replace]
CANON DR-C125 FIRST EDITION