Rdm Functions - ProLights EclCyclorama 050 User Manual

10 - RDM FUNCTIONS

The product can communicate using RDM (Remote Device Management) protocol over a DMX512
Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open
standard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting
existing non-RDM equipment. It allows a console or dedicated RDM controller to send commands to
and receive messages from specific fixtures.
The PIDs in the following tables are supported in the product.
DEVICE_LABEL
DMX_START_ADDRESS
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
CURVE
CURVE_DESCRIPTION
MODULATION_FREQUENCY
MODULATION_FREQUENCY_DESCRIPTION
FACTORY_DEFAULTS
Effects (Effects1-5)
Effects Speed (001-100)
Master/Slave (0:Master 1:Slave)
Full_On_Mode (Full On 0:HB 1:Studio)
Manual Color Red(000-255)
Manual Color Green(000-255)
Manual Color Blue(000-255)
Manual Color White(000-255)
Fix Color (1-15:R,G,B,W...)
White Preset (1-9:2800K,3200K,3500K...)
18
Parameter
PROLIGHTS - ECLCyclorama 050
PID GET
0x0082 x
0x00F0 x
0x00E0 x
0x00E1 x
0x0343 x
0x0344 x
0x0347 x
0x0348 x
0x0090 x
0x8209 x
0x8210 x
0x8211 x
0x8217 x
0x82C0 x
0x82C1 x
0x82C2 x
0x82C3 x
0x82BE x
0x82BF x
SET
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x