Installation Configurations - ProLights EclCyclorama 050 User Manual

INTRODUCTION FOR INSTALLATION SET UP
The ECLCYC050 is an asymemetrical fixture that has been designed for application as CYC light and
floodlight being able to be placed both at the front or at the end of the stage. Its soft and wide optics
features a beam angle of 80° horizontal x 40° Vertical (asymmetry of 25° on the vertical), making this
fixture flexible and effective to illuminate walls, sets and cyclorama uniformly with and even wash with
a perfect blending of colours in multiple and flexible configurations.
The ECLCYC050 ensures good light distribution from 1m up to 3m installation distance from the CYC
wall, and it can be installed placing fixtures next each other in a continuous line or with a clearance of
up to 3 meter without hard edges or dark gaps, even when illuminating curved canvas.

INSTALLATION CONFIGURATIONS

ECLCYC050 can be installed at the bottom, top or both top+bottom depending of the desired effect
(eveness or color gradient on the cyclorama).
One of the key aspects of the ECLCYC050 is its flexibility, and this document will shows how the
fixture will be have at different distance from the CYC wall, and how it performs when combines in
top+bottom configuration.
The ECLCYC050 is equipped with on board adjustable foot to regulate the tilt for the fixture focusing.
The Tilt adjustment has a range of ±8°. For distances from 1 to 1,5m the Tilt should adjusted at +8°,
for distances more than 3m the Tilt should be adjusted at -8°.
RELATION BETWEEN VERTICAL COVERAGE AND DISTANCE FROM THE CYC WALL
LEGEND
24
23
22
21
20
19
D
18
MFS
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1
HC
N
VC
N
1,5
Bottom
PROLIGHTS - ECLCyclorama 050
2
Distance (m)
Top + Bottom
2,5 3
7