Set The Date - VTech IP8300 User Manual

Telephone operation

Set the date

Follow these steps to set the date:
Press the Menu softkey from the idle screen.
Step 1:
Step 2: Press the , ,
then press the Select softkey or center NavKey/SEL/
Step 3: Press the up or down NavKey
the Options softkey.
Step 4: Press the up or down NavKey
the Select softkey or center NavKey/SEL/
will display.
Step 5: Press the left or right NavKey
between: MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/DD.
Step 6: Press the down NavKey
Step 7: Press the left or right NavKey
forth inside the box, and use the dial pad to enter the date.
Press the Apply softkey or center NavKey/SEL/
Step 8:
date will be shown on the Date and Time screen and the main
idle screen. The screen will display Enter valid value! if you have
entered an incorrect information.
Press the Back softkey to return to the previous screen.
Step 9:
NavKeys to choose Date and Time
and/or
to choose Date and press
or
or to choose Set then press
. The Set date screen
or to change the date format
to move to next box to enter the date.
or to move the cursor back and
www.vtechphones.com
Date and Time
.
Back
Date and Time
Time
Date
Alarm
Back
Date and Time
Time
to confirm. The
Date
Alarm
Back
Format
MM DD YYYY
Enter date
01-01-2007
Back
Select
02:41PM
01-01-2007
Options
02:24PM
Hide 01-01-2007
Set
Select
Set date
Apply
50