Base Settings; Change System Pin - VTech IP8300 User Manual

Telephone operation

Base settings

Use this menu to change the system PIN, de-register handset and clear the
voicemail waiting indication (VMWI).

Change system PIN

The system will require you to input the PIN to register or de-register a
handset. The default system PIN is 0000. The PIN must be four digits. To
change the PIN:
Press the Menu softkey from the idle screen.
Step 1:
Step 2: Press the , ,
Settings then press the Select softkey or center NavKey/SEL/
Step 3: Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
Step 4: Press the up or down NavKey
PIN then press the Select softkey or center NavKey/SEL/
Step 5: Use the dial pad to enter the old PIN when prompted. Press the
Apply softkey or center NavKey/SEL/
Step 6: Use the dial pad to enter the new PIN when prompted. Press the
left or right NavKey
character you want to delete and press REDIAL/REMOVE to delete
number if you make a mistake.
Step 7: Press the down NavKey
dial pad to re-enter the new PIN when prompted. Press the left or
right NavKey or
you want to delete and press REDIAL/REMOVE to delete number
if you make a mistake.
Step 8: Press the Apply softkey to confirm the new PIN and the screen will
display Accept. If the PINs entered in the two boxes are not the
same, PIN does not match! will be displayed.
NavKeys to choose Registration
and/or
or to choose Base Settings
or to choose Change System
when you are finished.
or to move the cursor to the right of the
to move to Confirm New PIN. Use the
to move the cursor to the right of the character
www.vtechphones.com
Registration Settings
Back
Base Setting
Change System PIN
.
De-register Handset
Clear VMWI
.
Back
.
Change System PIN
Enter OLD PIN
Back
Change System PIN
Enter New PIN
Confirm New PIN
Back
�� The PIN digits
you enter will
appear as * in the
box.
Select
Select
Apply
Apply
44