Register A Handset - VTech IP8300 User Manual

Telephone operation

Register a handset

Step 2:
�� The PIN entered
Step 3:
will be displayed
as * symbols on
the screen.
Step 4:
�� If a base location
is full there will be
Step 5:
an alpha-numeric
code listed
underneath the
base name.
Step 6:
Step 7:
Step 8:
Step 9:
This telephone has an intercom feature but you must own at least two
handsets to use intercom (see page 87). Additional handset(s) can be
purchased separately.
43
To display the telephone feature menu, press the Menu softkey
from the main idle screen.
Press the , , and/or
Settings then press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
locations for assigning telephone bases will be displayed.
Press the up or down NavKey
and press the Register softkey or center NavKey/SEL/
The handset will display Searching while it searches for the
telephone base. If the search is successful, a code from the
telephone base will be displayed. To register the handset to the
telephone base, press the Register softkey.
In the Enter PIN box, enter the system PIN. The default PIN is
0000. Press the Apply softkey.
Handset registered will be displayed when the registration process
is complete. The screen will return to the registration settings menu.
Press OFF to return to the idle screen.
www.vtechphones.com
NavKeys to choose Registration
or to choose Handset Settings
.
or to choose Register to Base
. A list of
or to choose an empty location
Registration Settings
.
Back
Register to base
Base1
Base2
Base3
.
Base4
Back Register
Register to base
00CFB-0868Bh
Back Register
Register to base
00CFB-0868Bh
Enter PIN
**
Back
Select
Apply