Installation And Configuration; Handset Installation; Handset Charger Installation - VTech IP8300 User Manual

Installation and configuration

Handset installation

Handset charger installation

�� Use only the AC
��
power adapter
supplied with this
telephone.
��
�� This power
adapter is
intended to be
correctly oriented
in a vertical
or floor mount
position.
3
Plug the smaller power adapter into the power port on the bottom of the charger. Route the
cord through the slots and plug the other end into the electrical outlet as shown below. Make
sure the electrical outlet is not controlled by a wall switch.
The power adapters for the handset charger and the telephone base are different. The power
adapter for the handset charger is the smaller adapter.
www.vtechphones.com