Date And Time; Set The Time - VTech IP8300 User Manual

Telephone operation

Date and time

The default date and time settings are 01-01-2007 and 12:00 AM, they will
be displayed on the idle screen. You can allow the date and time to be set
automatically if you subscribe to caller ID service provided by your local
telephone company (refer to Caller ID on page 19).

Set the time

To set the time on the handset:
Press the Menu softkey from the idle screen.
Step 1:
Step 2: Press the , ,
then press the Select softkey or center NavKey/SEL/
Step 3: Press the up or down NavKey
the Options softkey.
Step 4: Press the up or down NavKey
the Select softkey or center NavKey/SEL/
will display.
Step 5: Press the left or right NavKey
time between 12 and 24 hour.
Step 6: Press the down NavKey
time.
Step 7: Press the left or right NavKey
and forth inside the box, and use the dial pad to enter the time.
and/or NavKeys to choose Date and Time
or to choose Time then press
or to choose Set then press
. The Set time screen
or to alternate the format of
to move to the next box to enter the
or to move the cursor back
www.vtechphones.com
Date and Time
Back
Date and Time
Time
.
Date
01-01-2007
Alarm
Back Options
Date and Time
Time
Date
01-01-2007
Hide
Set
Alarm
Back
Set time
Format
12 Hour
Enter time
02:05
Back
Select
03:05
01:51PM
Select
PM
Apply
48