Table of Contents
Advertisement
Telephone operation
De-register handset
This menu allows you to de-register the handset from the telephone base.
To de-register the handset:
��
The default
system PIN is
Step 1:
0000.
Step 2:
��
When you enter
the PIN, the digits
Step 3:
will display as *
symbols on the
screen.
Step 4:
��
To register a
handset to the
base, see page
Step 5:
42.
Step 6:
Step 7:
45
Press the Menu softkey from the idle screen.
Press the
,
,
and/or
Settings, and press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
Handset then press the Select softkey or center NavKey/SEL/
. The Enter PIN screen will be displayed.
Use the dial pad to enter the PIN when prompted. Press the left or
right NavKey
or
to move the cursor to the right of the character
you want to delete and press REDIAL/REMOVE to delete number
if you make a mistake.
Press the Apply softkey or center NavKey/SEL/
screen will display all the handset(s) registered to the telephone
base.
Press the up or down NavKey
de-register from the telephone base and press the Select softkey
or center NavKey/SEL/
successfully de-registered.
www.vtechphones.com
NavKeys to choose Registration
or
to choose Base Settings
to choose De-register
or
to confirm. The
or
to choose the handset to
. The screen will display Handset
Registration Settings
Handset Settings
Base Settings
.
Back
.
Base Setting
Change System PIN
De-register Handset
Clear VMWI
Back
De-register Handset
Enter PIN
Back
De-register Handset
Handset 1
Handset 2
Handset 3
Handset 4
Back
Select
Select
Apply
Select
Advertisement
Table of Contents
