Swap Internal And External Calls - VTech IP8300 User Manual

Intercom calling

Swap internal and external calls

While you are on an external call and you wish to intercom another handset
without disconnecting the external call:
Step 1: While on a call, press the Options softkey.
Step 2: Press the up or down NavKey
press the Select softkey or center NavKey/SEL/
Step 3: Enter the destination handset number and the destination handset
will ring. The originating handset will beep and the external call will
be put on hold. To cancel the intercom call and return to the external
call, press the Swap softkey.
Step 4: After the destination handset has answered the intercom call, Active
will be displayed on the intercom connection window on the screen
of the originating handset to show the call which is activated.
Press the Options softkey on the originating handset. Press up
Step 5:
or down NavKey
the Select softkey or center NavKey/SEL/
internal and external call. Active will be shown on the screen to
indicate the activated call and On Hold will be shown on the screen
to indicate the call on hold.
Step 6: To end the intercom call without disconnecting the external call,
press the Options softkey on the originating handset. Press the up
or down NavKey
the Select softkey or center NavKey/SEL/
call.
Step 7: To transfer the external call, press OFF on the originating handset
while the external call is activated and the intercom call is on
hold.
or to choose Internal call then
or to choose Swap internal then press
to swap between the
or to choose Release internal then press
to end the intercom
www.vtechphones.com
Incoming Call
.
Int 2
00:01:55
Answer
88