Packing List - Bruno ELECTRA-RIDE III Installation Manual

Check carton contents
for shipping damage
immediately upon
receipt.
CRE-2100 NRUL 08-16-2004
The ELECTRA-RIDE III is shipped in two (2) main cartons plus
separately-wrapped rail sections. Before beginning an installation,
check the carton contents against the packing list to be sure you
have all the components.
Also, check the carton contents for shipping damage upon receipt.
Damage claims must be filed promptly by the Dealer, not the
Manufacturer.
Bruno Independent Living Aids cannot be responsible for shipping
damage.
CARTON 1
[ ] 1 ea. complete carriage assembly with covers
[ ] 1 ea. footrest handle
[ ] 1 ea. antenna
[ ] 1 ea. antenna clip with snap rivet
CARTON 2
[ ] 1 ea. seat assembly
[ ] 1 ea. standard rocker switch
[ ] 1 ea. keyed rocker switch
*****(Inside CARTON 2 will be 3 smaller cartons.)*****
Cartons 2a and 2b
[ ] bumper assembly
[ ] end plate assembly with hardware
[ ] clamps and associated parts/hardware
Carton 2c
[ ] 1 ea. battery charger with mounting plate and screws
[ ] 1 ea. rail charge lead
[ ] 1 ea. installation jumper
[ ] 2 ea. transmitters, call/send with hardware kit and
mounting plates
[ ] 1 ea. final limit ramp
[ ] 1 ea. lubri-plate
RAIL SECTIONS WRAPPED SEPARATELY.
7

PACKING LIST

©2004,1998 Bruno Independent Living Aids, Inc.®