INSTALLATION
Clamp Placement and Rail Installation
1.
Set the clamps on the steps, as indicated on the Application Drawing.
NOTES: a) The clamp with the longer foot faces the outside (chair side of rail).
b) The foot of the clamps placed on the curves faces inward, and the
rounded head of the clamp attaches to the outside of the rail.
c) Make sure the ridge of the clamp spacer is down (see page 13).
longer foot faces the outside
2.
Referring to the Application Guide, position clamps to ensure correct step nose
clearance.
Note: Before attaching the clamp to the rail, make sure the threaded end of the
bolt is pointing to the inside of the installation (away from the stairs), and
that the longer-footed clamps point toward the outside of the installation
(chair side of the rail).
©2004,1998 Bruno Independent Living Aids, Inc.®
curve clamp: foot to inside
and rounded head to top
10
CRE-2100 NRUL 08-16-2004