Final Limit Ramp And Switch - Bruno ELECTRA-RIDE III Installation Manual

FINAL LIMIT RAMP AND SWITCH

final limit switch
RESETTING THE OVERSPEED
overspeed switch
CRE-2100 NRUL 08-16-2004
1.
final limit ramp
2.
1.
overspeed
lever
cam lever
(in set
tripped
position)
Mount the final limit switch ramp using the
(2) predrilled holes at the top end of the rail.
NOTE: The final limit switch and ramp are
mounted to the back side of the
rail (same side as the charge bracket).
The final limit switch is factory-installed
below the charge bracket on the bottom of
the carriage.
If the overspeed switch trips, you must
reset (2) levers (overspeed lever and
cam lever). See photos at left.
CAM LEVER
set
19
©2004,1998 Bruno Independent Living Aids, Inc.®
INSTALLATION