Important Charging Notes - Bruno ELECTRA-RIDE III Installation Manual

INSTALLATION
Always park the carriage at the upper or lower end of the rail to maintain
full battery charge.
Keep the charger plugged into a household outlet at all times.
If the charger plug and lead are located in a vulnerable location, Bruno
recommends the use of a plug lock to prevent accidental unplugging of the
battery charger. Plug locks are available at hardware and home improvement
stores.
Frequently check that the LED charging indicator is ON (see photo below).
A glowing LED indicates correct polarity and proper connection to a live
outlet.
©2004,1998 Bruno Independent Living Aids, Inc.®

IMPORTANT CHARGING NOTES

NOTE: In installations where the carriage cannot be parked at
one of the ends of the rail (stairways with a door at the
top, for example), use the remote call/send transmitter
to run the carriage to the other end of the rail.
charging LED
22
CRE-2100 NRUL 08-16-2004