Table of Contents
Advertisement
MOUNTING LEAD IN CABLE CHANNEL
CHARGE BRACKET HOOKUP
mount cable in channel
plug in power cord
CRE-2100 NRUL 08-16-2004
The rail is shipped with the adhesive-backed cable channel
mounted on the back of the rail.
1.
Insert the power lead into the channel.
2.
Attached the lead to the charge bracket wiring
harness.
NOTE: Be sure all leads and harness are
securely mounted to avoid damage.
3.
Coil any excess harness wiring and attach it under
the rail.
4.
Position the battery charger:
in plain view (to monitor proper charging)
near one end of the rail
in a location that does not create
a tripping hazard.
5.
Connect power cord to the nearest wall or floor
outlet.
6.
Bundle any excess power cord length to avoid
creating a tripping hazard.
7.
Secure the battery charger in its permanent
location with the Phillips pan head sheet metal
screws provided (8 x .75" lg).
21
INSTALLATION
©2004,1998 Bruno Independent Living Aids, Inc.®
Hide quick links:
Advertisement
Table of Contents
