INSTALLATION
INSTALLING THE ANTENNA
antenna clip
insert antenna clip into carriage
fully seat antenna in receptable,
tighten threaded connector and
secure antenna in clip
antenna installed
©2004,1998 Bruno Independent Living Aids, Inc.®
ANTENNA INSTALLATION (viewed facing the seat):
right-hand units: right side of carriage
left-hand units: left side of carriage
1.
Mount the antenna clip by gently pushing the snap
rivet into the pre-drilled hole (see photo to left).
2.
Insert the antenna into the appropriate hole on the
side of the carriage.
3.
Secure the antenna by tightening the threaded
connector.
NOTE: As you begin to thread the connector,
twist the antenna back and forth to make
sure that it has been inserted as far as
possible into the receptacle.
This action ensures that the necessary
contact is made for proper operation of the
Stairway Elevator.
24
CRE-2100 NRUL 08-16-2004