Replacing The Batteries: Call/Send Transmitter; Operation - Bruno ELECTRA-RIDE III Installation Manual

REPLACING THE CALL/SEND TRANSMITTER BATTERIES
front
(3) AAA
batteries
required
(open
access
door)
rear
CRE-2100 NRUL 08-16-2004
1. Open the access door on the rear
of the call/send transmitter.
2. Remove the (3) existing AAA batteries.
3. Install (3) new AAA batteries according
to the (+) and (-) symbols. Please
refer to the illustration to the left.
4. Reposition and close the access door.
5. Be sure to recycle the batteries in
accordance with local regulations.
29
©2004,1998 Bruno Independent Living Aids, Inc.®

OPERATION