Maintenance - Craftsman 247.77635 Operator's Manual

Customer Responsibilities

MAINTENANCE

SCHEDULE
Lube Spring Latch
Lube Chipper Chute Hinge
Lube Chute Deflector
Inspect Chipper Blades
Inspect Shredder Blade
Check Oil Level
Change Oil
Clean Air Filter Precleaner
Clean Engine
Check Spark Plug
Lubrication
Spring Latch: Lubricate the latch with light oil once a
season
Chipper Chute Hinge: Lubricate the hinge with light oil
once a season.
Chute Deflector: Lubricate the pivot points on the
chute deflector with light oil once a season.
Engine: Check engine oil level before each use as
follows:
• Remove the dipstick and wipe with a clean cloth.
Figure 13
• Replace and tighten dipstick.
• Remove and check the oil fill level. Add oil if
necessary (Refer to Page 9 for proper oil type).
MAINTENANCE
Full
13
Air Cleaner
Clean air cleaner's precleaner every 25 hours under
normal conditions. To remove air cleaner, proceed as
follows:
• Remove knob and cover. See Figure 14.
Cover
Pre-cleaner
Figure 14
SERVICE
DATES
Knob
Air Cleaner
Cartridge
Stud
Base