Craftsman 247.77635 Operator's Manual page 7

Attaching The Debris Collection Bag
• To attach the bag, place the opening of the bag
completely over the chute deflector.
• Position the bag so that the wing knobs which
secure the chute deflector to the housing are
completely covered.
• Pull on the drawstrap until the bag is tight around
chute deflector. See Figure 4.
Debris Collection Bag
Figure 4
Emptying the Debris Collection Bag
• Squeeze the locking buckle to release the bag's
drawstrap before loosening it from the chute
deflector. See Figure 5
• Empty the bag and reattach to the chute deflector
opening. Refer to Figure 4.
Housing
7
Locking Buckle
Figure 5