Maintenance; Check List; Products Life Expectancy; General Cleaning - Shoprider Valencia User Manual

Maintenance

At six monthly interval you should lubricate the following parts with a light oil or a similar lubricant;
• Seat pivot post.
• Seat release lever pinion.
• Wheel bearings
• Axle of scooter
Product Life Expectancy
Your scooter has been designed to provide the user with a long, reliable life provided it is correctly
maintained and regularly serviced by an authorised dealer. However, due to inevitable wear and tear
and technological improvements it is recommended that the average usable life of this scooter is five
years.

General Cleaning

The shrouds and seat of the scooter should be cleaned using a damp cloth and gentle detergent. Do
not use abrasive cleaners or solvents, as this will damage the plastic components. Do not spray water
(hose or pressure washer) onto the scooter as this may cause damage to the electronics.
We suggest that your scooter should undergo a full service at least once a year by an authorised
Shoprider dealer.

Check list

Please check the following;
• Tyres are in good condition.
• Front wheels spin freely.
• Moving parts, pivots and frame fixing are not damaged or worn.
• All hand knobs and levers are secure.
To ensure an uninterrupted power connection is maintained, it is recommended that the connections
between the front and rear chassis are regularly cleaned and lubricated with a contact treatment
grease such as Electrolube SGB20S.
To undertake this operation, dismantle the scooter as per the user manual and thoroughly clean both
sets of connectors (front and rear) with an alcohol based solvent. Apply the contact treatment grease
to both sets of the contacts (a thin film is sufficient, do not use the entire sachet).
13