Surfaces; Transferring; Dismantling; Storage - Shoprider Valencia User Manual

Surfaces

Your scooter will perform well over many surfaces. However, avoid long grass, loose gravel, sand,
mud and ice.

Transferring

Lift up the arm-pad from the side you wish to leave or sit on the scooter. Use an aid for balance
if required.
Caution:
Do not use the tiller or armrests to support the full weight during transfers.
Dismantling for Transportation & Storage

Dismantling

The Valencia is designed to be quickly and easily disassembled without tools into sections for
transportation and storage:
• Lift the basket up and off the bracket.
• Remove the seat as described earlier.
• Remove the battery pack by lifting on the handles.
• Loosen the tiller adjustment knob and lower the tiller and re-tighten the knob.
• Lock the tiller by pulling the yellow lever up and to the left.
• Detach the rear drive assembly by moving the yellow detach lever to the 'DETACH'
position and lifting the assembly backwards at the same time. The assembly should
now be clear of the main chassis.
Assembly is the reverse of the above procedure.
The Valencia is now separated into five components for easy transportation or storage.
Note:
Never occupy device whilst in a vehicle.

Storage

Your scooter should be stored in a dry environment, preferably a garage or shed. Tarpaulins and
covers may create condensation during certain weather conditions. If your scooter is to be stored for
prolonged periods, fully charge the batteries and disconnect the battery plugs.
Please ensure your scooter is protected from heavy rain or high humidity and is stored in a dry
environment. Direct exposure to rain or dampness could cause the scooter's electrics to malfunction.
Very cold weather can severely deplete battery condition (up to 40%). If left for any period during cold
weather it is very important that the scooter is fully charged before use.
12