Batteries - Shoprider Valencia User Manual

Table of Contents

Advertisement

We also recommend that the connectors between the battery pack and the main chassis are also
treated at the same time to prevent any carbon build up (round plate connectors and pins). Simply
re-assemble the scooter as per user manual after these procedures have been undertaken.
Note:
Should any part of your scooter need replacing or repairing please contact your local
dealer to undertake any maintenance. Failure to do this may void your Warranty.
Batteries and Battery Chargers
Note:
Charge the batteries completely (8-12 hours) prior to first use.

Batteries

The Shoprider Valencia is supplied with a closed battery pack which contains two 34/36 Amp, 12 Volt
sealed lead acid batteries. The battery pack is situated under the front of the seat and can be removed by
lifting them away from the chassis.*
Low temperatures, rough terrain and the weight of the user can affect battery performance. Your
battery gauge is a guide only to the level of charge remaining in your batteries and will give its best
indication while the scooter is moving.
Note:
Your seat height is set in the lowest position for shipping purposes. In this position the seat
must be removed to allow the battery pack to be removed.
Note:
Low temperatures, rough terrain and the weight of the user can affect battery
performance. Your battery gauge is a guide only to the level of charge remaining in your
batteries and will give its best indication while the scooter is moving.
Note:
Batteries recommended by Shoprider must be used if they need to be replaced. An
authorised Shoprider dealer must carry out battery replacement.
Disposing and recycling of used battery
Batteries must always be recycled correctly. Do not dispose of them with your
domestic refuge.
For further information regarding your nearest recycling facility please contact your
local authority.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gk10

Table of Contents