Table of Contents
Advertisement
charging socket located on the tiller. Plug the A/C cord plug into the wall socket and the other
end into the charger (2-pin). Please refer to the LED indicator description based on charging
status of the charger's manual. Once the batteries are completely charged, unplug the A/C
cord from the wall then unplug the 3-pin lead from the tiller.
WARNING: Only use the original Shoprider
approved charger!
®
This charger is for indoor use only. DO NOT expose it to rain or water spray.
Do not leave the charger plugged into the charger port if the charger is not charging.
Charging Socket
Fig. 8
10. MAINTENANCE
Servicing
Ensure the scooter is serviced every 12 months to ensure it remains in safe working order
failure to do so may cause catastrophic failure with possible injury and damage to surrounding
property. Regular servicing will ensure trouble free operation.
Please Note
Heavy users of the scooter may require more frequent servicing.
Consult with your authorised Shoprider
dealer to have the servicing requirements completed
®
every year.
Lubrication
At six-month intervals you should lubricate the following parts with a light oil or similar
lubricant:
• Seat pivot post.
• Seat release lever pinion.
• Wheel bearings.
• Axle of scooter.
CAUTION – DO NOT USE WD40 TO LUBRICATE PARTS!! DO NOT LUBRICATE TRANSAXLE/GEAR
BOX!! In the event of any difficulties please consult your dealer.
8
Shoprider Scooters User Guide
Advertisement
Table of Contents
