Power Cabling; Cable Connections - Hyundai N800 Series Installation Manual

4. POWER CABLING

4.1 CABLE CONNECTIONS

The mains cables are connected to terminals L1, L2 and L3. The motor cables are connected to terminals U, V and W.
N800A
A. The control panel
B. The control unit
Use cables with a minimum heat resistance of +70 °C (158 °F). In the selection of the cables and the fuses, refer to the nominal
output current of the drive. You can find the nominal output current on the rating plate.
Cable type
The mains cable
The motor cable
The control cable
Fig. 21: The principal connection diagram
C. The power unit
Table 15: The selection of the correct cable
Category C2
1st environment
1
3*
4
EMC requirements
2nd environment
Category C3
1
2
4
4. POWER CABLING
Category C4
1
2
4
32