2. Install the 2 clevis pins into the hood assembly
and bagger mounting bracket. Secure them
with 2 hairpin cotter pins (Figure 8).
Figure 8
1. Hood assembly
2. Bagger mounting bracket
3. Install the bag tab into the notch in the hood
assembly. Do this for all bags (Figure 9).
Note: The bags will rest on the bagger frame.
Figure 9
1. Hood assembly
2. Bag
3. Bag tab
4. Lower the bagger hood over the bags
(Figure 10).
3. Hairpin cotter pin
4. Clevis pin
4. Notch
5. Bagger frame
Figure 10
1. Hood
2. Bag
5. Position the bagger latch under the latch hook
(Figure 11).
6. Push down on bagger latch until it locks into
place (Figure 11).
Figure 11
1. Bagger latch
10
3. Bagger latch
4. Latch hook
2. Latch hook