Sanyo Basic Concepts; Execution Mode; Returning To Os - Sanyo MBC-550 Series User Manual

Sanyo Basic Concepts
Execution Mode
The program generated and stored into the memory by the
program edit mode can be executed sequentially in order
of line number using the RUN,GOTO, and GOSUB instruc­
tions. The program can be temporarily terminated using
the BREAK key or the STOP instruction in the program.
The interrupted program can be restarted using the CONT
instruction.
modification was made to the source program during the
temporary termination.
Although it cannot be restarted if a
The system returns to the Sanyo Basic mode after execu­
ting the END statement in a program or a source program
is completed (no more statements to be executed) from
the execution mode.
Returning to OS
When the SYSTEM instruction is found in a program or
the SYSTEM instruction is directly executed from Sanyo
Basic, the control is given to the operating system (OS
mode) from the Sanyo Basic interpreter. The system
enters the OS mode whenever the RESET key is pressed,
if the system disk is in drive A,
3-6