Double Drive Systems - Sanyo MBC-550 Series User Manual

Double Drive Systems
The format for double drive systems for the DISKCOPY
command is:
DISKCOPY [drive 1:][drive 2:]
Drive 1: is the disk drive that contains the disk that
you want to copy; drive 2: is the disk drive that
contains the blank formatted disk. For example, if you
want to make a copy of your system disk which is in
drive A:, type:
DISKCOPY A: B:
The system will display:
Insert source diskette into drive A:<CR>
Insert formatted target diskettes into drive B:(<CR>)
Press any key when ready
Since we want to copy the system disk, we will leave it
in drive A:
would take the system disk out and insert the other
disk in drive A: before depressing the RETURN (<CR>)
key.
If we wanted to copy another disk, you
The cursor will drop to the second prompt after the
disk has been written into memory. After you have a
formatted blank disk in drive B: depress the RETURN
key. The files will be read from memory and written to
the disk. After this is done, the following prompts
will be displayed:
Copy complete
Copy another (Y/N)?
1-33