Disk Drive; Inserting The Diskette - Sanyo MBC-550 Series User Manual

Disk Drive
Never insert or withdraw a disk while the drive is
running. Except for initial start up,
symbols, A: or B: (second drive) for DOS mode and > for
Sanyo-Basic mode will be displayed when the drive unit
is not running.
The input
Inserting the Diskette
Withdraw the diskette from its
envelope.
Open the drive door by moving
the gate lever up.
Open
Hold the diskette by the label
and insert into the drive. The
write protect cut out on the
disk edge will face left and
the read/write slot will lead
into the drive.
Insert the diskette till the
end of its passage.
8
Close
Close the door by moving the
gate lever down.
1-16