Cabinet Cover Removal - Sanyo MBC-550 Series User Manual

CABINET COVER REMOVAL
In order to install Sanyo peripherals you must remove
the cabinet cover and in most cases the back panel. The
instructions below will guide you in accomplishing
this. Please read them carefully and refer to them for
all peripheral installations.
1) Turn the power off and unplug the AC cord from the
electrical outlet.
2) Unscrew (counter clockwise) the case screws on the
sides of the computer (two on each side).
3) Unscrew the top center screw in the rear of the
computer (one screw).
*0 Slide the top of the cabinet away from the drives.
Please refer to the illustration below.
CABINET COVER
FRONT