Joy Stick - Sanyo MBC-550 Series User Manual

JOY STICK
The MBC Series computer are Apple(r) Joy stick
compatible.
1) Turn the power off and unplug the AC cord from the
electrical outlet.
2) Remove the case top. Refer to the instructions at
the beginning of this chapter.
3) Remove the plate labeled JOY STICK/PADDLE
by removing the single screw inside the rear panel.
i|) Thread the joy stick or paddle cable through the
hole and attach to the socket labeled CN8. This is
located about the middle of column H.
5) You will notice that one edge of the joy
stick/paddle plug is rounded,
inserted at the corner of the socket labeled CN8.
This edge will be
6) Press the plug into the socket gently, but firmly.
HP* JOY STICK
&
CNU
\
6-19