Sanyo MBC-550 Series User Manual page 293

7) Replace the drive plate and the two
into the cabinet.
drives back
8) Align the screw holes and tighten.
9) Replace the plugs for the initial drive and insert
plugs for the second drive. The signal line plug (large
black plug) has one red wire. This should be at the
right side of the plug as you insert it. Please refer
to the illustration. The power plugs (H wires only - 1
yellow, 2 black, and 1 red) can only be inserted the
correct way. If you have trouble pushing the plug in,
turn it over and try again. Again, the red wire is to
the right.
RED WIRE
\ RED WIRE
6-8