r>--yr
to be copied and a blank formatted disk in drive B:
Continue as in single drive. After the disk is copied,
The following prompts will be displayed.
Copy complete
Copy another (Y/N)?
Type Y (for yes) if you wish to copy other disks or
make a second copy,
default drive prompt is displayed and you are back on
the operating system level.
If you type N (for no), the
Note: If either of the disks you are using has defec
tive tracks, DISKCOPY will not work.
Use the COPY
command to back up your disks in these cases. The COPY
command will skip over defective tracks.
4-16