Circle - Sanyo MBC-550 Series User Manual

CIRCLE
Purpose
Draws a circle or a circular arc.
Form
CIRCLE(<X>,<Y>) ,<radius>[, [<initiatingposition>]
[ ,[<terminatingposition>[,[<ratio>][ ,<circle
color>]]]]
Description
(1) <X> and <Y> indicate a point on the world coordi­
nate system. Using this point as the central point, a
circle is drawn having the radius specified in <radius>
(dots).
(2) For <initiating position> and terminating posi­
tion^ the value having an absolute value within the
range of 0 1 and assuming the circumference is 1, is
used. These values are used for creating wedges. In the
illustration below, the initiating position could be
0.125 and the terminating position 0.25.
3-109