Sanyo MBC-550 Series User Manual page 216

5.
When instructions say nPress any key" you can
press any alpha (A-Z) or numeric (0-9) key.
6. You must include the filename extension when
referring to a file that already has a filename
extension.
You can abort commands when they are running by
depressing the CTRL key and the C key at the same
time.
7.
8. Commands take effect only after you have depress­
ed the RETURN key.
Wild cards (global filename characters) and
device names (AUX, CON, LST, PRN, or NUL) are not
allowed in the names of any commands.
9.
V/hen commands produce a large amount of output to
the screen, the display will automatically scroll
to the next screen. You can depress the CTRL key
and the S key at the same time to suspend the
display. Press any key to resume the display on
the screen.
10.
The prompt from the command processor is the
default drive designation (drive A) plus a colon
11.
A:
Disk drives will be referred to as source drives
and destination drives A source drive is the
drive you will be transferring information from.
A destination drive is the drive you will be
tansferring information to.
12.
4-19