Cont - Sanyo MBC-550 Series User Manual

CONT
Purpose
The CONT resumes a program which has been halted.
Form
CONT [N]
Description
(1) This instruction restarts the program which has
been temporarily terminated by END, STOP instructions,
or < BREAK> key.
(2) If the program was modified during interruption,
CONT in invalid. Therefore, even if it is entered, the
execution will not be restarted.
(3) CONT N inhibits temporary termination using the
BREAK key during program execution. This CONT N mode
is released by reexecuting CONT.
3—40